User`s manual

www.dﬁ .comChapter 3 Hardware Installation

Chapter 3

Signal Pin# Pin Type Pwr Rail /Tolerance PU/PD Description

GPO0 A93

GPO1 B54

GPO2 B57

GPO3 B63

GPI0 A54

GPI1 A63

GPI2 A67

GPI3 A85

Signal Pin# Pin Type Pwr Rail /Tolerance PU/PD Description

VCC_12V A104~A109

B104~B109

C104~C109

D104~D109

Power Primary power input: +12V nominal. All available VCC_12V pins on the connector(s) shall be used.

VCC_5V_SBY B84~B87 Power Standby power input: +5.0V nominal. If VCC5_SBY is used, all

available VCC_5V_SBY pins on the connector(s) shall be used. Only

used for standby and suspend functions. May be left unconnected if

these functions are not used in the system design.

VCC_RTC A47 Power Real-time clock circuit-power input. Nominally +3.0V.

GND A1, A11, A21, A31,

A41, A51, A57, A60,

A66, A70, A80, A90,

A96,A100, A110,

B1, B11, B21 ,B31,

B41, B51, B60, B70,

B80, B90, B100,

B110, C1,C11, C21,

C31, C41, C51, C60,

C70, C76, C80, C84,

C87, C90, C93, C96,

C100, C103, C110,

D1,D11,D21, D31,

D41, D51, D60,

D67, D70,D76, D80,

D84, D87, D90,

D93, D96, D100,

D103, D110

Power Ground - DC power and signal and AC signal return path.

All available GND connector pins shall be used and tied to Carrier

Board GND plane.

I CMOS 3.3V / 3.3V General purpose input pins.

Power and GND Signal Descriptions

GPIO Signals Descriptions

O CMOS 3.3V / 3.3V General purpose output pins.