User`s manual
3
26
Award BIOS Setup Utility
1. Select Chipset Features Setup in the main program screen and
press <Enter>.
Sélectionnez Chipset Features Setup dans lécran de programme
principal et appuyez sur <Entrée>.
Chipset Features Setup in dem Hauptbildschirm auswählen, und
die Eingabetaste (Enter) drücken.
2. Select the external system bus clock of your processor in the
CPU/PCI Clock (MHz) field. The options are Default, 66.8/33.4,
75/37.5, 83.3/41.65, 100.3/33.4, 103/34.33, 105/35, 110/36.67,
112/37.33, 115/38.33, 120/40, 124/31, 124/41.33, 133/33.25,
133/44.33, 140/35 and 150/37.5. When selecting the external
bus clock of your processor, the PCI clock will at the same time
appear next to the external bus clock selected. For example, if
you selected 66.8/33.4, 66.8MHz is the external bus clock and
33.4MHz is the PCI clock. Regardless of the type of processor
used, the default setting is Default. Under this setting, the
system will run according to the processors clock frequency. If
you selected an option other than Default and is unable to
boot up the system, there are 2 methods of going back to its
default setting.
Method 1: Clear the CMOS data by following the procedure
in section 2.4 (chapter 2) of this manual. All fields
in the BIOS Setup will automatically be set to its
default settings.
Method 2: Press the <Inser t> key and power button
simultaneously, then release the power button first.
You must keep-on pressing the <Insert> key until
the power-on screen appears. This will allow the
system to boot according to the FSB of the
processor. Now press the <Del> key to enter
the Award BIOS setup utility. Select Chipset
Features Setup and set the CPU/PCI Clock
(MHz) field to Default or an appropriate clock
frequency.
Note:
When using a 66MHz FSB processor, the AGP
clock and the CPUs external bus clock are similar.
When using a 100MHz FSB processor, the AGP
clock is 2/3 of the CPUs external bus clock.