User`s manual

9
1
Quick Setup Guide
Quick Setup
Guide
 At the time this document was printed, the CPU marked with
asterisk (*) is not yet available. It is included in the table for
reference only.
 The processors supported by the system board support VID
(Voltage Identification). The switching voltage regulator on the
system board will automatically set the voltage regulator
according to the voltage of the processor.
1.2.2 CPUs Front Side Bus - JP3 and JP4
2-3 On
1-2 On
All Off
1
2
3
1
2
3
1
2
3
Warning:
Some processors, when overclocked, may result to the processors or
systems instability and are not guaranteed to provide better system
performance. If you are unable to boot your system due to
overclocking, make sure to set these jumpers back to their default
settings.
JP3
1-2 On
2-3 On
2-3 On
All Off
JP4
1-2 On
2-3 On
All Off
All Off
Auto*
66MHz
100MHz
133MHz
* denotes default setting