User`s manual

28
English
2
English
2.2 Supported Softwares
2.2.1 VIA Hardware Monitor
The system board comes with the VIA Hardware Monitor utility
contained in the provided CD. It is capable of monitoring the
systems hardware conditions such as the temperature of the CPU
and system, voltage, and speed of the CPU and chassis fans. It also
allows you to manually set a range to the items being monitored. If
the values are over or under the set range, a warning message will
pop-up. The utility can also be configured so that a beeping alarm
will sound whenever an error occurs. We recommend that you use
the Default Setting which is the ideal setting that would keep the
system in good working condition.
Note:
Use this utility only in Windows
®
95, Windows
®
98, Windows
®
98 SE, Windows
®
ME, Windows
®
2000 or Windows NT
®
4.0
operating system.
To install the utility, insert the CD into a CD-ROM drive. The autorun
screen (Main Board Utility CD) will appear. Click the VIA Hardware
Monitor button to install the utility. Refer to its readme file for
instructions on using the utility.
2.2.2 VIA
®
Service Pack
The CD in the system board package also comes with the VIA
®
Service Pack. The service pack includes the following drivers.
 AGP VxD Driver
 VIA INF Driver (VIA Chipset Functions Registry)
 VIA PCI IRQ Miniport Driver
To install the drivers, insert the CD into a CD-ROM drive. The
autorun screen (Main Board Utility CD) will appear. Click the VIA
Service Pack button. For installation instructions or information, click
the Read Me button in the autorun screen.