User`s manual
66
3
BIOS Setup
OnChip IDE Device
Move the cursor to this eld and press <Enter>. The following screen will appear.
SATA Mode
Legacy Mode Support
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
Item Help
Menu Level
↑↓→←: Move Enter: Select F1: General Help+/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
IDE
Disabled
If your IDE hard drive
supports block mode
Select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support
The settings on the screen are for reference only. Your version may not be identical to
this one.
SATA Mode
IDE
This option congures the Serial ATA drives in IDE mode.
AHCI
This option allows the Serial ATA devices to use AHCI (Advanced Host Con-
troller Interface).
Legacy Mode Support
Some operating systems are not supported in Native mode. If you are using
this kind of operating system, set this eld to Enabled.