User`s manual

60
3
BIOS Setup
Quick Power On Self Test
This eld speeds up Power On Self Test (POST) after you power on the system.
When Enabled, the BIOS will shorten or skip some check items during POST.
First Boot Device, Second Boot Device, Third Boot Device and Boot Other
Device
Select the drive to boot rst, second and third in the “First Boot Device” “Sec-
ond Boot Device” and “Third Boot Device” elds respectively. The BIOS will boot
the operating system according to the sequence of the drive selected. Set “Boot
Other Device” to Enabled if you wish to boot from another device.
Security Option
This eld determines when the system will prompt for the password - everytime
the system boots or only when you enter the BIOS setup. Set the password in
the Set Supervisor/User Password submenu.
System
The system will not boot and access to Setup will be denied unless the cor-
rect password is entered at the prompt.
Setup
The system will boot, but access to Setup will be denied unless the correct
password is entered at the prompt.
Hard Disk Boot Priority
This eld is used to select the boot sequence of the hard drives. Move the cursor
to this eld then press <Enter>. Use the Up or Down arrow keys to select a de-
vice then press <+> to move it up or <-> to move it down the list.
Phoenix - AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority
Item Help
Menu Level 
Use <↑> or <↓> to select
a device, then press <+>
to move it up, or <-> to
move it down the list.
Press <ESC> to exit this
menu.
↑↓: Move PU/PD/+/-: Change Priority F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
 1. Ch4 M. : WDC WD1600JB-00REA0
2. Bootable Add-in Cards

The settings on the screen are for reference only. Your version may not be identical to
this one.