User`s manual

35
2
Hardware Installation
USB Ports
USB allows data exchange between your computer and a wide range of simulta-
neouslyaccessibleexternalPlugandPlayperipherals.
The system board is equipped with four onboard USB 2.0/1.1 ports. The two
10-pin connectors allow you to connect 4 additional USB 2.0/1.1 ports. The ad-
ditionalUSBportsmaybemountedonacard-edgebracket.Installthecard-edge
bracketto an availableslotattherearofthesystemchassistheninserttheUSB
portcablestoaconnector.
BIOS Setting
Congure the onboard USB in the Integrated Peripherals submenu (“USB Device
Setting”section)oftheBIOS.Refertochapter3formoreinformation.
Driver Installation
You may need to install the proper drivers in your operating system to use the
USB device. Referto youroperatingsystem’smanual ordocumentation for more
information.
USB2
USB3
USB6-7
USB4-5
USB1
USB0
1
VCC
-Data
+Data
GND
Key
VCC -Data +Data GND N.C.
2
10
9