User`s manual
Table Of Contents
- About this Manual
- Warranty
- Static Electricity Precautions
- Safety Measures
- About the Package
- Before Using the System Board
- Chapter 1 - Introduction
- Chapter 2 - Hardware Installation
- Chapter 3 - BIOS Setup
- Chapter 4 - Supported Software
- Appendix A - Watchdog Sample Code
- Appendix B - System Error Message
- Appendix C - Troubleshooting
- Appendix D - NLITE and AHCI Installation Guide
67
3
BIOS Setup
KBC Input Clock
This is used to select the input clock of your keyboard.
Power On Function
This field allows you to use the PS/2 keyboard to power-on the
system.
Keyboard 98 When this option is selected, press the “wake up”
key of the Windows
®
98 compatible keyboard to
power-on the system.
Button only Default setting. Uses the power button to power
on the system.
Any Key Press any key to power-on the system.
Super IO Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
Super IO Device
Item Help
Menu Level
X
↑↓→←: Move Enter: Select F1: General Help+/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
KBC Input Clock
Power On Function
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Serial Port 3
Onboard Serial Port 4
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
Watch Dog Timer Select
PWRON After PWR-Fail
12MHz
BUTTON ONLY
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
378/IRQ7
Standard
3
Disabled
Off