User`s manual

124
D
NLITE and AHCI Installation Guide
AHCI
TheinstallationstepsbelowwillguideyouinconguringyourSATAdrivetoAHCI
mode.
1. EntertheBIOSutilityandconguretheSATAcontrollertoIDEmode.
2. Install Windows XP but do not press F6.
3. Download relevant RAID/AHCI driver les supported by the motherboard
chipset from Intel’s website.
Transfer the downloaded
driverlestoC:\AHCI.
4. Open Device Manager and
right click on one of the
Intel Serial ATA Storage
Controllers, then select
Update Driver.
If the controller you se-
lected did not work, try
selecting another one.