User`s manual

58
3
Award BIOS Setup Utility
Time (hh:mm:ss) Alarm
This is used to set the time you would like the system to power-on.
If you want the system to power-on everyday as set in the Date
(of Month) Alarm field, the time set in this field must be later than
the time of the RTC set in the Standard CMOS Features submenu.
IRQ Wakeup Events
Move the cursor to this field and press <Enter>. The IRQ3 to
IRQ15 fields will appear. When enabled, access to the specified
IRQ will cause the system to wake up completely from the power
management mode. When disabled, the system will not wake up
from the power management mode despite access to the specified
IRQ.
VGA
When set to On, the system will respond and wake up to any VGA
activity.
LPT & COM
Select the port you would like the system to respond and wake up
when an event occurs on that port.
HDD & FDD
When set to On, the system will respond and wake up to any hard
drive or floppy drive activity.
PCI Master
When set to On, the system will respond and wake up to any PCI
or bus master activity.