User`s manual

19
1
Quick Setup Guide
Quick Setup
Guide
1.4.3 Advanced BIOS Features
1.4.4 Advanced Chipset Features
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Advanced BIOS Features
Item Help
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled and
someone attempt to
write data into this
area, BIOS will show a
warning message on
screen and alarm beep
F7:Optimized Defaults
F1:General HelpESC:Exit↑↓→← Move
F6:Fail-Safe Defaults
Enter:Select
F5:Previous Values
+/-/PU/PD:Value F10:Save
Virus Warning
CPU Internal Cache
External Cache
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
OS Select For DRAM > 64MB
Video BIOS Shadow
C8000-CBFFF Shadow
CC000-CFFFF Shadow
D0000-D3FFF Shadow
D4000-D7FFF Shadow
D8000-DBFFF Shadow
DC000-DFFFF Shadow
Disabled
Enabled
Enabled
Enabled
Floppy
HDD-0
LS/ZIP
Enabled
Disabled
Enabled
On
Disabled
6
250
Setup
Non-OS2
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
The screen above list all the fields available in the Advanced BIOS Features
submenu, for ease of reference in this manual. In the actual CMOS setup,
you have to use the scroll bar to view the fields. The settings on the screen
are for reference only. Your version may not be identical to this one.
X
X
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Advanced Chipset Features
System BIOS Cacheable
Video RAM Cacheable
Memory Hole At 15M-16M
AGP Aperture Size (MB)
AGP Secondary Lat Timer
AGP Fast Write
AGP Data Transfer Mode
AGP Always Compensate
SDRAM ECC Setting
Super Bypass Mode
SDRAM Timing setting by
SDRAM PH Limit
SDRAM Idle Limit
SDRAM Trc Timing Value
SDRAM Trp Timing Value
SDRAM Tras Timing Value
SDRAM CAS Latency
SDRAM Trcd Timing Value
Enabled
Enabled
Disabled
128
20h
Enabled
4x
Disabled
Disabled
Disabled
Auto
1 Cycle
0 Cycle
3 Cycle
1 Cycle
2 Cycle
2.5Cycle
2 Cycle
Item Help
Menu Level
↑↓→← Move
F6:Fail-Safe Defaults F7:Optimized Defaults
F1:General HelpEnter:Select
F5:Previous Values
+/-/PU/PD:Value F10:Save ESC:Exit
The settings on the screen are for reference only. Your version may not be
identical to this one.
X
X
X
X
X
X
X