User`s manual

Pentium
TM
OverDrive Ready System Board
3-8 u Initial Setup Program
Change Password
The default password is AMI. If you want to change
the password, make sure you set the Password Checking
Option to "Always" or "Setup" under Advanced CMOS
Setup. If not, the error message below will appear on
the screen:
<Password Option> must be enabled in Advanced CMOS Setup
Press any key to continue
Use the arrow keys to highlight the Change Password
Option and press <Enter>. The message below will
appear.
Enter Current Password:
The preset password is AMI. Type AMI or the current
password and press <Enter>. The message below will
appear:
Enter NEW Password:
Type in the the new password. You are limited to six
ASCII characters. If you type more than six characters,
you will get the following error message:
Error, press any key