User`s manual
486-OCV Plus
v Initial Setup Program
After you power up your system, the BIOS message
appears on your screen and the memory count begins.
After the memory test, the message below will appear on
the screen if your CMOS Setup is correct:
Enter CURRENT Password:
The default password is AMI. You have three chances
to type the correct password. If the password is still
incorrect after the third try, the system will lock up.
You must turn your system off and back on to restart it.
You can change the password under the change pass-
word option. Refer to the "Change Password" section
on page 3-8 for more information. A screen similar to
the one shown below will appear. If the password
option is disabled, you will directly access this screen.
Initial Setup Program u 3-1