User`s manual

486-OCV Plus
Positioning the CPU Above the ZIF Socket
Gently push the handle down until the handle locks into
place. You will hear a click when the handle is secure.
When you want to remove the chip, simply lift the
handle and remove the chip.
Warning:
A minimum of 1.4" vertical clearance (measured above
the socket surface) must be kept free above the CPU.
Do not run cables or other obstructions in this area.
The cables (floppy drive, hard drive, CD-ROM, etc.)
must be routed clear of the CPU with a minimum of
0.25" horizontal clearance to allow heat dissipation.
Installation Overview u 2-24
CPU Pin 1