User`s manual

Pentium
TM
OverDrive Ready System Board
2-7 u Installation Overview
1. Position the HSIM module above the HSIMM
socket with the chips of the module facing the center
of the system board.
2. Seat the module at an angle into the bank. Make
sure it is completely seated. Tilt the module upright
until it locks in place in the socket.
Board Configuration
The 486-OCV Plus is designed with jumpers and con-
nectors onboard. Make sure that the jumpers are set
correctly before installing the system board into your
system unit.
Locations of Jumpers and Connector Pins
on the 486-OCV Plus System Board
J1
J2
J3
J4
J5
J6
J7
JP34
J8
J10
J11
J9
OPTi
82C499
JP25 JP26
JP6
JP9
JP7 JP8
JP12 JP14
JP13
JP31
SL1
SL2
JP23
JP24
JP18
JP32
JP38
JP39
JP29