User`s manual

38
2
Hardware Installation
DVI-I Port
DVI-I
W
The DVI-I port is used to connect an LCD monitor. This port sup-
ports DVI-D signal only.
Connect the display device’s cable connector to the DVI port. After
you plug the cable connector into the DVI port, gently tighten the
cable screws to hold the connector in place.
Dual Display
The system board provides total of 3 display interfaces - DVI, VGA
and LVDS. However, you can only connect two display devices at a
time.
BIOS Setting
Configure the display devices in the Chipset menu of the BIOS. Refer
to chapter 3 for more information.