User`s manual

47
2
Hardware Installation
The system board is equipped with two IEEE 1394 connectors at
locations J2 (1394-0) and J5 (1394-1) for connecting external 1394
ports. The 1394 ports may come mounted on a card-edge bracket.
Install the card-edge bracket to an available slot at the rear of the
system chassis then insert the connector that is attached to the
1394 port cables to J2 or J5. Make sure pin 1 of the cable connec-
tor is aligned with pin 1 of the J2 or J5.
IEEE 1394 Connectors (G7B630-N/NR)
W
1
2
10
9
TPA+
TPA-
Ground
Ground
TPB- TPB+
Key
+12V (fused)
+12V (fused)
Ground
1394-0
1394-1