User's Manual
Table Of Contents
- ZALPHA 3.3 User Manual
- Copyright Notice
- Table of Contents
- Table of Figures
- Table of Tables
- 1. Preface
- 2. Safety
- 3. Getting Started
- 4. Product Presentation
- Section 1: About Zalpha
- Section 2: Modules of Zalpha
- Section 3: Safety Features
- Section 4: LED Indicators
- Section 5: Expansion IO
- Section 6: Main Features of Zalpha
- 5. Troubleshooting
- 6. Services and Maintenances
- 7. Disclaimer
- 8. Certification
- 9. Change Log
Product Presentation
48
www.dfautomation.com
ZALPHA 3.3 User Manual
Manual Charging Safety Trigger
1. Upon the start of AMR operation with the manual charging cable connected, the operation will
be stop immediately and a Safety Triggered popup with Charger connected message will be
shown on the LCD Touchscreen.
Figure 4-31: Charger Connected Safety Triggered Message
2. Remove the manual charging cable that is connected to the Manual Charging Port
3. After disconnecting the manual charging cable, a Safety Resume message as in figure below
will be shown
Figure 4-32: Safety Resume Message
4. Press the resume button on the display panel or Start Button to resume the operation.
5. A Resuming a message will be shown on the LCD Touchscreen
6. AMR will automatically resume its operation after 2 seconds