User's Manual
Table Of Contents
- ZALPHA 3.3 User Manual
- Copyright Notice
- Table of Contents
- Table of Figures
- Table of Tables
- 1. Preface
- 2. Safety
- 3. Getting Started
- 4. Product Presentation
- Section 1: About Zalpha
- Section 2: Modules of Zalpha
- Section 3: Safety Features
- Section 4: LED Indicators
- Section 5: Expansion IO
- Section 6: Main Features of Zalpha
- 5. Troubleshooting
- 6. Services and Maintenances
- 7. Disclaimer
- 8. Certification
- 9. Change Log
Getting Started
16
www.dfautomation.com
ZALPHA 3.3 User Manual
Part 1: Charging Contact and Charging Station
he Charging Contact of Zalpha is located at the side of the AMR. The Charging Contact is
configurable to either left or right side of the AMR. Changing side for the Charging Contact will
involve some rewiring work. Please contact authorized personnel to perform the changes.
Warning:
Improper installation of the Charging Contact can cause damage to the AMR.
Figure on the left shows the Charging Station of Zalpha. The Charging Station consists of two guide
wheels at the side, and a spring-loaded Charging Contact at the middle.
Figure 3-2: Charging Station of Zalpha
The rated charging voltage and current of the charger are 28.8V and 12.5A. At the side of the Charging
Station, there are Manual Charging Port and the power inlet. Every Charging Station unit is provided
with one Power Cable and a Manual Charging.
Figure 3-3: Power Cord of Charging Station
Figure 3-4: Manual Charging Cable
T
Power Meter
Power Inlet
Charging
Contact
ID Plate
Manual
Charging Port