Instructions / Assembly

1. Push and turn burner control knob to the "OFF" position.

2. Close the LP tank valve.

3. Disconnect the regulator from the LP tank to close the

gas supply when not in use.

4. Make sure that the unit is completely cooled before

touching any of the components or putting on the cover.

TO EXTINGUISH

1. Keep your appliance free and clear from combustible materials.

2. Visually inspect burner for obstructions, keep tank enclosure free and clear from debris.

3. After the burner and lava rocks are completely cooled down, use a soft brush to get

rid of the mild stains, dirt and soil. Wipe with a soft cloth.

ROUTINE CARE

1. Stubborn stains, discoloration and possibly rust pitting can occur from exposure to

harsh outdoor conditions.

2. Be careful not let any powder or solvent come in contact with painted or plastic

components as damage may occur.

STUBBORN STAINS

1. Store the appliance in a cool dry place away from direct sunlight.

2. Make sure both the gas and the appliance are turned oﬀ before changing battery.

3. Protect your appliance with the cover when not in use.

4. The propane cylinder must be disconnected and stored outdoors before the appliance

can be stored indoors.

4.Use Manufacturer approved or supplied replacement parts and accessories only.

Please contact the Manufacturer for information regarding replacement hoses,

thermocouples, ignitors, lava rocks, etc.

MAINTENANCE

OFF

LOW

HIGH

IGITER-PUSH