Instructions / Assembly

18
•Always confirm that the burner control knob is in the OFF position before
connecting the gas supply.
•Do not obstruct the flow of combustion air and ventilation air to the appliance.
To Connect:
1. Ensure that there is no debris caught in the head of gas cylinder, and the head
of regulator valve.
2. Insert the nipple of the valve coupling into the cylinder valve and tighten the
black coupling nut by turning it clockwise wit hone hand while holding the
regulator with the other hand. (See diagram) Hand tighten only.
To Disconnect:
1. Always confirm that the cylinder valve is in the OFF position before
disconnecting the gas supply.
2. Hold the regulator with the one hand and loosen the black coupling nut by
turning it counter-clockwise with the other hand. (See diagram)
IMPORTANT
Disconnect the propane cylinder from the regulator valve when the appliance is
not in use.
LP (Liquid Propane) Gas Supply Connection