Use and Care Manual

ManualsBrandsDexpan ManualsBuilding materialsExpansive Demolition Grout for Concrete Rock Breaking and Removal 44 lb. Box Type 2 (50F-77F)

Page 12

Instruction

Please ALWAYS wear

Usage Instruction

Concrete Demolition and Rock Breaking has never been EASIER!

3 Easy Steps to SUCCEED: Drill, Mix & Fill

1) Drilling *Please call for applications with depths less than 6 inch.

 Use 1.5 inches (3.8 cm) drill bit, holes should be drilled 1 ft (30 cm)

apart. 80-90% of the depth, do not go through. (Diagram 1)

2) Mixing

 In a bucket, combine 0.4 gallons (1.5 liters) of water with one 11 lb. (5

kg.) bag of Dexpan

. (Diagram 2)

 Mix well to a slurry. (a drill and paddle is recommended)

3) Filling

*Use of Dexpan in Extreme Hot Temperature could cause Blowouts.

 Dexpan

slurry should be poured into holes within 10-15 minutes

after mixing. (Diagram 3)

Coverage: Normally one 11 lb. (5 kg.) bag of Dexpan

can fill up to 9

lineal feet (2.5 meters) of 1.5 inches (3.8 cm) diameter holes.

Cracking Or Cutting Time: Properly mixed, the cracks may appear

after 2~8 hours of filling drilled holes, depending on drilling patterns,

temperature, humidity, rock or concrete hardness. Give it 24 hours for

best results.

**WARNING!**

IMPORTANT SAFETY PRECAUTIONS and FIRST AID:

 Read safety and operation instruction CAREFULLY.

 SAFETY GOGGLES, RUBBER GLOVES and a DUST-PROOF

MASK is required.

 **WARNING** BLOWOUTS may occur! DO NOT look directly

into filled holes.

 DO NOT breathe in dust. AVOID eye and skin contact. If eye or skin

contact should occur, rinse it off IMMEDIATELY and consult doctor.

 Choose correct type of Dexpan based on rock / concrete temperature.

 Keep Dexpan

in DRY storage. Seal box / bag after use.

Rubber Gloves Safety Goggles Dust Mask

SDS (Safety Data Sheet) and Limited Warranty

are available at www.Dexpan.com

For technical support, Please call our Toll-Free

866

272

4378

4378 or 575-528-5454 (USA)

1. Drill

2. Mix

3. Pour