User's Manual

46
Master Keyboard Functions
Parameter Setting Explanation
CC Assign1 O, CC1 ~ CC127
These four control change messages
are available to be transmitted to
the external device when the zone is
activated.
OFF: No control change is transmitted.
CC1 ~ CC127: Select the control
change to send via MIDI
0 ~ 127: Select the value.
CC Value1 0 ~ 127
CC Assign2 O, CC1 ~ CC127
CC Value2 0 ~ 127
CC Assign3 O, CC1 ~ CC127
CC Value3 0 ~ 127
CC Assign4 O, CC1 ~ CC127
CC Value4 0 ~ 127
Activate a MIDI zone
1. From the Master page, press the "ZONE" Function button
to enter in the MIDI ZONE page.
The status of 4 zones are showed.
2. Use the [][] buttons to choose the zone you want
enable.
3. Press the "ON" Function button to activate the MIDI zone
you chosen.
In the example above we activate the MIDI zone 1
4. To activate another MIDI zone repeat the steps (3) and (4)
You can activate up to four MIDI zone.
Using the Knobs to Send MIDI
messages (TO MIDI)
The four knobs in the left panel help you to send MIDI control change
messages. You can use them stand-alone or as control knobs of the zones.
See "Congure the MIDI zones" (p. 45).
1. Press the "TO MIDI" button to send control change
messages via the knobs (1, 2, 3, 4).
/
Now the knobs are enabled to control an external MIDI devices.
MEMO
For each knob you can assign a dierent control change. See p.
51.
2. Rotate the desiderate knob.
The control change values are transmitted via MIDI and a temporary
window shows the current value.
3. Press the "TO MIDI" button again to release the knobs to
the AUDIO FX function.