User's Manual

48
MENU Options (Advanced Section)
3. If you selected the "Common" part, the following page is showed:
Common
Parameter Setting Explanation
Active Sensing
(FEH)
OFF, ON
Default: On
This MIDI messages is transmitted
constantly at intervals of approximately
250 ms.
This MIDI message is used to monitor
the MIDI connection. If there was a
disconnection, after a connection has
been made, the connected device no
longer receives the active sensing (FEH)
message and reset all notes that have
remained actives messages.
Select “On” if you want to transmit the
Active Sensing MIDI.
 MIDI SET
MIDI Sets are memories for MIDI settings. The VIVO S1 provides four
MIDI Set memories.
The rst MIDI Set, called "Dexibell", is read-only and allows you to
restore the MIDI factory setting. The other three memories allow
use to memorize and recall your MIDI conguration.
The second MIDI Set called "KeyboardZone", it is read-only and is a
fast way to congure the MIDI channels using the zones.
1. Use the [][] to select the MIDI Set and press the "RECALL" Function
button to load it.
2. Press the "SAVE" Function button to jump in the SAVE MIDI SET page.
 SAVE MIDI SET
1. Use the [][] to select the MIDI Set memory and press the "WRITE"
Function button to save your conguration.
GLOBAL
[MENU]buttonGLOBAL
GLOBAL MEMORY
These parameters allow you to adjust some global aspect of your piano.
These parameters are automatically saved in the VIVO S1 global memory
area.
Parameter Setting Explanation
Auto OFF
O, 5 min, 10 min, 30 min, 2 hours,
4 hours
Default: 2 hours
This parameter allows you to
cause the VIVO S1 to switch itself
o after the selected number of
minutes has elapsed if you are
not using it.
Select “O” if you prefer not to
use this function.
Pedal Global, Memory
Global: Set this value if you want
the pedal assignments are saved
in the global area. The pedal
assignment does not depend on
the recalled memory.
Memory: Set this value if you
want the pedal assignments are
saved in the Memories. The pedal
assignment depends on the
recalled memory.
SOUND LIBRARY
[MENU]buttonSOUND LIBRARY
You can import sounds library in the internal memory of VIVO S1 and use
them in your performances. For details see "Additional Sound" (p. 24).
FACTORY RESET
[MENU]buttonFACTORY RESET
This function allows you to recall the VIVO S1’s original factory settings.
Pleasesee"RestoringtheFactorySettings(FactoryReset)"(p.31).
VERSION INFO
[MENU]buttonVERSION INFO
This page shows you the version number of theVIVO S1’s operating
system.