User's Manual
Table Of Contents
- Important Safety Instruction
- Relevant Indications
- Panel Description
- Connections Quick Guide
- Quick Guide
- Before You Start to Play
- Connecting the AC Adaptor
- Installing and Removing Batteries
- Connecting the Pedals
- Connecting External Audio Amplifier
- Listening Through Headphones
- Connecting Digital Player devices
- Connecting the VIVO S1 to Your Computer
- Connecting an USB Memory (commercially available)
- Connecting an USB MIDI Interface (commercially available)
- Ground Terminal
- Turning the Power On/Off
- Demo of the VIVO S1
- Basic Operation
- Selecting Tones
- Additional Sound
- Sound Effects
- Personalizing Your Sounds
- Other Functions
- Practice with Song Player
- Recording Your Performance
- Working with the Memories
- About the Memories and Memory Set structure.
- Saving Your Settings in the Internal Memory
- Recalling your Settings from Internal Memory
- Saving Your Settings in the USB Memory (commercially available)
- Recalling your settings from an USB Memory
- Renaming a Memory
- Exporting a Memory Set in the USB Memory
- Importing a Memory Set from the USB Memory
- USB MIDI Keyboard Controller
- Playing with Audio Backing Tracks
- MENU Options (Advanced Section)
- Appendix
- Troubleshooting
- Specifications
- Index
- SETTING Parameters Group
- T2L EDITOR
- EFFECTS
- CONTROL
- TUNING
- MEMORY
- USB REMOVE
- AUDIO INPUT
- MIDI
- GLOBAL
- SOUND LIBRARY
- FACTORY RESET
- VERSION INFO
44
MENU Options (Advanced Section)
Parameter Setting Explanation
Funct.
OFF,
Sostenuto,
Soft,
FXA On-O,
FXB On-O,
Memory Prev.,
Memory Next,
RotaryS/L,
Part On/O,
XMure FillUp,
XMure FillDw,
XMure SceneUp,
XMure SceneDw,
XMure Play/Stop,
XMure Ending
Default:RotaryS/L
OFF: No function assigned.
See "Pedal Functions Explana-
tion" (p. 51).
Part
O, Main, Coupled, Lower,
Main+Lw, Main+Cp, Main+Lw+Cp,
Lower+Cp
OFF: Select “OFF” if you don’t
need of pedal.
MAIN, COUPLED,
LOWER, MAIN+LW, MAIN+CP,
MAIN+LW+CP, LOWER+CP: the
pedal is assigned to the specied
part or parts.
PEDAL ASSIGN 2
Parameter Setting Explanation
Funct.
O,
Sostenuto,
Soft,
FXA On-O,
FXB On-O,
Memory Prev.,
Memory Next,
RotaryS/L,
Part On/O,
XMure FillUp,
XMure FillDw,
XMure SceneUp,
XMure SceneDw,
XMure Play/Stop
XMure Ending
Default: Soft
OFF: No function assigned.
See "Pedal Functions Explana-
tion" (p. 51).
Part Same as "Int. Part" of ASSIGN 1 pedal. See the above explanation.
EXPRESSION PEDAL
Parameter Setting Explanation
Funct. Expression, Modulation
Expression: The pedal is assigned
to the expression.
Modulation: The pedal is assigned
to the Modulation.
Part
O, Main, Coupled,
Lower, Main+Lw,
Main+Cp, Main+Lw+Cp,
Lower+Cp
OFF: Select “OFF” if you don’t need
expression pedal.
MAIN, COUPLED,
LOWER, MAIN+LW, MAIN+CP,
MAIN+LW+CP, LOWER+CP: the
damper pedal is assigned to the
specied part or parts.
Pedal Functions Explanation
Function Explanation
Sostenuto The pedal is used as Sostenuto.
Soft
The pedal is used as Soft The soft pedal reduces the volume
and slightly changes the timbre of notes played while the
pedal is pressed.
FXA On-O
FXB On-O
Allows you to switch the MFXA/B on and o.
Memory Prev.
Memory Next
Allows you to select the next or previous Memory.
Rotary S/L ThisfunctionalternatebetweenthefastandslowRotaryspeeds.
Part On/O Enable or disable the selected keyboard part.
XMure FillUp
XMure FillDw
Using these functions you can select a the next or the
previous drum pattern in the XMure® application.
XMure SceneUp
XMure SceneDw
These functions allow you to change scene of the accompani-
ment in the XMure® application.
XMure Play/Stop Play or Stop the playback of a XMure® pattern.
XMure Ending Select the Ending pattern.
TUNING
[MENU]buttonTUNING
GLOBAL MEMORY
MASTER TUNE
Setting Explanation
415.4 Hz~ 440.00 Hz~ 466.1 Hz Select the desiderate tuning.
"440.00 Hz" Function button Use the "440.00 Hz" and "442.00
Hz" Function buttons to tuning the
instrument at those values.
"442.00 Hz" Function button