User's Manual

37
Recalling your settings from an USB Memory
Recalling your settings from an USB
Memory
1. Connect an USB memory to the VIVO S1. For details see p.
16.
A USB icon appears in the Icons eld of Main page. See "Main Page"
(p. 19).
2. Press the [MEMORY/WRITE] button.
The[MEMORY/WRITE]buttonindicatorlightssteadyandthelistof
Internal Memory is shown.
MEMO
Youcanalsoselectthisfunctionpressing[MENU]button
MEMORYRECALL.
3. Press the "USB" Function button.
The display shows a list of all les and folders on the USB storage
device you have just connected.
4. Use the [][] buttons to scroll through les and folders
to select the Memory Set.
Memory Set Icon Memory Set le extension
.rif
Use the "OPEN" Function Button to enter in a folder.
If you opened a folder by mistake, press the [ ]buttontoreturnto
a higher level.
5. Press the "OPEN" Function button to open the selected
Memory Set.
The display shows the list of Memories:
6. Use the [][] buttons to move the cursor inside the list
to select the Memory you want to recall.
7. Press the "RECALL" Function button to recall the Memory.
The Memory is recalled and the display shows the Memory
highlighted.
MEMO
TodisplaytheInternalMemoriesagain,pressthe"INTERNAL"
Function button.
Renaming a Memory
This function allows you to change the name of a selected Memory.
1. Press the [MENU] button and select MEMORYRENAME.
The list of Internal Memory is shown:
2. Use the [][] buttons to move the cursor inside the list
in the position you want to rename the Memory.
3. Press the "RENAME" Function button to conrm.
The display changes to:
4. Use the [][] and the [][] buttons to rename the
Memory. See "Assigning the Name You Specify" (p. 20)
for details.
5. Press the "OK" Function button to conrm the name.
The memory will be renamed and the list of Internal Memory is
shown.
Exporting a Memory Set in the USB
Memory
Use this function for exporting the Internal Memory Set in the USB
Memory (commercially available).
This function is useful to create special sets for each event and import
them at your convenience.
You can also use this function to backup the Internal Memories.
1. Connect an USB memory to the VIVO S1. For details see p.
16.
A USB icon appears in the Icons eld of Main page. See "Main Page"
(p. 19).