User's Manual
Table Of Contents
- Important Safety Instruction
- Relevant Indications
- Panel Description
- Connections Quick Guide
- Quick Guide
- Before You Start to Play
- Connecting the AC Adaptor
- Installing and Removing Batteries
- Connecting the Pedals
- Connecting External Audio Amplifier
- Listening Through Headphones
- Connecting Digital Player devices
- Connecting the VIVO S1 to Your Computer
- Connecting an USB Memory (commercially available)
- Connecting an USB MIDI Interface (commercially available)
- Ground Terminal
- Turning the Power On/Off
- Demo of the VIVO S1
- Basic Operation
- Selecting Tones
- Additional Sound
- Sound Effects
- Personalizing Your Sounds
- Other Functions
- Practice with Song Player
- Recording Your Performance
- Working with the Memories
- About the Memories and Memory Set structure.
- Saving Your Settings in the Internal Memory
- Recalling your Settings from Internal Memory
- Saving Your Settings in the USB Memory (commercially available)
- Recalling your settings from an USB Memory
- Renaming a Memory
- Exporting a Memory Set in the USB Memory
- Importing a Memory Set from the USB Memory
- USB MIDI Keyboard Controller
- Playing with Audio Backing Tracks
- MENU Options (Advanced Section)
- Appendix
- Troubleshooting
- Specifications
- Index
- SETTING Parameters Group
- T2L EDITOR
- EFFECTS
- CONTROL
- TUNING
- MEMORY
- USB REMOVE
- AUDIO INPUT
- MIDI
- GLOBAL
- SOUND LIBRARY
- FACTORY RESET
- VERSION INFO
36
Working with the Memories
The list of Internal Memory is shown.
MEMO
Youcanalsoselectthisfunctionpressing[MENU]button
MEMORYWRITE.
4. Press the [USB] Function button to select the destination
memory.
The display shows a list of all les and folders on the USB storage
device you have just connected.
Now you can save:
In a Memory Set previously saved. Continue from step (5)
In a new Memory Set. See "Saving in the New Memory Set"
below.
Saving in the Memory Set previously saved
5. Use the [][] buttons to scroll through les and folders
to select the Memory Set.
Memory Set Icon Memory Set le extension
.rif
Use the "OPEN" Function button if you need to enter in a folder.
If you opened a folder by mistake, press the [ ]buttontoreturnto
a higher level.
6. Press the "OPEN" Function button to recall the Memory
Set.
The display shows the list of memories in the Memory Set.
7. Use the [][] buttons to move the cursor inside the list
in the position you want to replace the Memory.
8. Press the "SAVE" Function button to conrm.
The display changes to:
9. If you want to name your new Memory, see "Assigning the
Name You Specify" (p. 20) for details.
10. Press the "OK" Function button to save the Memory.
The memory will be saved and the list of memories is shown.
Saving in the New Memory Set
1. Press the "NEW SET" Function button to create an empty
Memory Set.
This page allows you to create a new Memory Set List whose name
is selected automatically by the VIVO S1.
2. If you want to name your new Memory Set, see "Assigning
the Name You Specify" (p. 20) for details.
3. Press the "OK" Function button to conrm the name.
The display shows contents of the new Set just created.
4. Use the [][] buttons to move the cursor inside the list
in the position you want to write the Memory.
5. Press the "SAVE" Function to conrm.
The display changes to:
A Memory name is suggested by the VIVO S1.
6. If you want to name your new Memory, see "Assigning the
Name You Specify" (p. 20) for details.
7. Press the "OK" Function button to save the Memory.
The memory will be saved and the list of Memories is shown.