User's Manual

31
Adjusting the AUDIO IN Input Level
[*]Thisparametercanonlybeeditedifthe“KeyboardTouch”parameterisset
to “Fixed”.
Adjusting the AUDIO IN Input Level
The input level of the audio source you connect can be set with the
“AUDIO INPUT Level” parameter.
1. Press [MENU/EXIT] button and select SETTINGAUDIO INPUT
function using the [], [] and [] buttons. See "Moving
the cursor and setting parameter values" (p. 20).
The following page is shown.
2. Use the [] [] buttons to adjust your desiderate the
AUDIO IN level.
Master Equalizer
The equalizer give you the possibility to boosting or reducing the
low-frequency or high-frequency range of the sound. Adjust the
Master EQ parameters to reach the best possible sound when
listening through dierent reproduction systems, headphones, or
an external speaker system.
1. Press [MENU/EXIT] button and select EFFECTSMASTER EQ
1. Use the [], [] buttons to select the parameter and use
the [] [] buttons to adjust the value.
Parameter Setting Explanation
High Gain -12~ 0 +12 dB
Use this parameter to set the
level of the high frequency.
Positive values boost (increase
the volume of) that frequency.
Negative values cut (attenu-
ate) it.
Mid Freq 200 ~ 8000 Hz
This parameter allows you to
set the cuto frequency of the
middle band.
Mid Gain -12~ 0 +12 dB
Use this parameter to set
the level of the selected MID
frequency. Positive values
boost (increase the volume
of) that frequency. Negative
values cut (attenuate) it.
Low Gain -12~ 0 +12 dB
Use this parameter to set the
level of the low frequency.
Positive values boost (increase
the volume of) that frequency.
Negative values cut (attenu-
ate) it.
Master Equalizer Preset
VIVO S1 comes with some Presets that can be handy in particular
situations or a good way to get you started. You might want to start
with a preset, then customize it until it is just right and save it in the
user area.
1. From the "MASTER EQ" page press the "PRESET" Function
button.
2. Use the [], [] buttons to select the desired preset.
3. Press the "SELECT" Function button to conrm your
choice.
Its "EQ" icon is highlighted to indicate that the preset has been
loaded.
Saving Your User Preset
Make the necessary adjustments to obtain the sound that suits you
best.
1. From the "MASTER EQ" page, press the "SAVE" Function
button.
2. If you wish, you can give a name to the preset pressing the
"RENAME" Function button. For details how to rename see
"Assigning the Name You Specify" (p. 20).
3. Press the "WRITE" Function button to save your preset.
The display shows a conrmation message.
Restoring the Factory Settings (Factory
Reset)
The following function allows you to recall the VIVO S1’s original factory
settings.
WARNING
All data will be deleted. Backup your own settings to an USB
memory.
1. Press [MENU/EXIT] button and select FACTORY RESET function
using the [], [] and [] buttons. See "Moving the
cursor and setting parameter values" (p. 20).
The display shows the following window.
2. Press the "YES" Function button proceed.
The message “Complete” informs you that the VIVO S1 has been
initialized.