User's Manual
Table Of Contents
- Important Safety Instruction
- Relevant Indications
- Panel Description
- Connections Quick Guide
- Quick Guide
- Before You Start to Play
- Connecting the AC Adaptor
- Installing and Removing Batteries
- Connecting the Pedals
- Connecting External Audio Amplifier
- Listening Through Headphones
- Connecting Digital Player devices
- Connecting the VIVO S1 to Your Computer
- Connecting an USB Memory (commercially available)
- Connecting an USB MIDI Interface (commercially available)
- Ground Terminal
- Turning the Power On/Off
- Demo of the VIVO S1
- Basic Operation
- Selecting Tones
- Additional Sound
- Sound Effects
- Personalizing Your Sounds
- Other Functions
- Practice with Song Player
- Recording Your Performance
- Working with the Memories
- About the Memories and Memory Set structure.
- Saving Your Settings in the Internal Memory
- Recalling your Settings from Internal Memory
- Saving Your Settings in the USB Memory (commercially available)
- Recalling your settings from an USB Memory
- Renaming a Memory
- Exporting a Memory Set in the USB Memory
- Importing a Memory Set from the USB Memory
- USB MIDI Keyboard Controller
- Playing with Audio Backing Tracks
- MENU Options (Advanced Section)
- Appendix
- Troubleshooting
- Specifications
- Index
- SETTING Parameters Group
- T2L EDITOR
- EFFECTS
- CONTROL
- TUNING
- MEMORY
- USB REMOVE
- AUDIO INPUT
- MIDI
- GLOBAL
- SOUND LIBRARY
- FACTORY RESET
- VERSION INFO
29
Making Slight Additions or Sound Alterations
3. Press the button [] to access the “T2L EDITOR” page.
The following page appears:
4. Now select in which part of the keyboard you want to
modify the sound selected in the step 1.
The display shows the Editor sound page that contains all possible
parameters for the tone you selected:
In the example above the VIVO Grand piano was selected.
5. Use the [] [] buttons to select the parameter you wish
to modify.
6. Use the [] [] buttons to adjust the value.
7. To modify a tone in the LOWER or COUPLED part press the
relative Function button.
Saving your changing
All you need to do is to save your setting in a memory. See
"Working with the Memories" (p. 35).