User's Manual

28
Personalizing Your Sounds
Raised dampers of held note
Parameter Setting
StringReso -64 ~ 0 ~ +63
Damper Reso
It's the typical noise generated by the free to vibrate strings (all
damper raised) when the dumper pedal is pressed.
Parameter Setting
DamperReso -64 ~ 0 ~ +63
Cabinet Reso (Wurly, Ac. Guitar, Harp)
Thanks to this parameter you can increase or decrease the
cabinet resonance.
Parameter Setting
CabinetReso -64 ~ 0 ~ +63
Bell (for Electric Piano)
The "bell sound" is characteristic of some electric pianos that
became particularly popular throughout the 1970s.
You can adjust the quantity of this typical sound.
Parameter Setting
Bell -64 ~ 0 ~ +63
Click (for Vintage Organ)
The key click is typical of vintage organs. It's a electrical
pop which was the result of the keys making contact. It was
considered a defect, there were all kinds of eorts to reduce it,
but it never could be eliminated. Meanwhile it has become a
characteristic "click" for rock and modern musicians.
You can adjust quantity of click sound when press and release
a key.
Parameter Setting
Click -64 ~ 0 ~ +63
Growl (for Eletric Piano)
This is a typical distortion of the sound during the phase attack
that give a "growling" eect. Thank to this parameter you can
increase or decrease the eect.
Parameter Setting
Growl -64 ~ 0 ~ +63
O Noise (for Clavinet, Harpsy, Church Organ, E.
Piano, Fingered Bass)
You can adjust the quantity of the noise eect that some
instrument produce when the key is released.
Parameter Setting
O Noise -64 ~ 0 ~ +63
Percussion (Vintage Organ)
Not to be confused with the key click of pop organ. The percussion
was introduced with the advent of electronic organs to emulate the
percussive sounds of the harp, xylophone and marimba.
The percussion is a typical register in the upper manual. This
parameter adjust the quantity of percussive sound.
Parameter Setting
Percussion -64 ~ 0 ~ +63
Attack, Hold, Decay, Sustain and Release
These parameters characterize the envelope of the sound. When a
pipe organ's key is pressed, for example, it plays a note at constant
volume; the sound dies quickly when the key is released. By
contrast, the sound of a guitar is loudest immediately after a string
is plucked, and quickly fades. Try to change the envelop of a sound
by these parameters.
Attack
Decay
Sustain ReleaseHold
Key Released
AMPLITUDE
t
Key Pressed
Parameter Setting
Attack
-64 ~ 0 ~ +63
Hold
Decay
Sustain
Release
Ride
ThisparameterincreaseordecreasethevolumeofRideCymbals
soundcontainedinthe"Ac.Bass&Ride"tone.
Parameter Setting
Ride -64 ~ 0 ~ +63
Making Slight Additions or Sound
Alterations
Although Dexibell sound are developed to achieve the maximum
sound accuracy , you can necessity to modify them at your taste
them or create new sonority.
1. Select the sound that you want personalize.
2. Press the [MENU/EXIT] button and use the [] []
buttons to select the “T2L EDITOR” function group.