User's Manual

20
Basic Operation
Moving the cursor and setting parameter
values
1. Press the [MENU/EXIT] button to access to the available
function groups.
2. Use the [] [] buttons to select the desired function
group.
3. Press the [] button to enter in the selected function
group.
4. Use the [] [] buttons to scroll the list of parameters.
The selected parameter eld is underlined.
5. Use the [] [] buttons to set the desired value.
6. Press the [MENU/EXIT] button to return to the main page.
Assigning the Name You Specify
In many cases you'll have to assign a name to a le. In the following
example, we will learn how to give a Memory name.
After the selection of saving a Memory, the display looks as follows:
A Memory name is suggested by the VIVO S1.
1. Use the [][] buttons to select a dierent character.
2. Use the [] [] buttons to select the next character
position you want to change, then use the [][]
buttons again.
3. You can press the [A/a/#] Function button to switch
between upper- and lower-case characters as well as
numbers.
4. To delete the selected character, simultaneously press the
central and right Function button.
5. To insert a character, simultaneously At the same press
the left and central Function button.
6. Repeat steps (2) and (3) to complete the name.