User's Manual
Table Of Contents
- Important Safety Instruction
 - Relevant Indications
 - Panel Description
 - Connections Quick Guide
 - Quick Guide
 - Before You Start to Play
- Connecting the AC Adaptor
 - Installing and Removing Batteries
 - Connecting the Pedals
 - Connecting External Audio Amplifier
 - Listening Through Headphones
 - Connecting Digital Player devices
 - Connecting the VIVO S1 to Your Computer
 - Connecting an USB Memory (commercially available)
 - Connecting an USB MIDI Interface (commercially available)
 - Ground Terminal
 - Turning the Power On/Off
 - Demo of the VIVO S1
 
 - Basic Operation
 - Selecting Tones
 - Additional Sound
 - Sound Effects
 - Personalizing Your Sounds
 - Other Functions
 - Practice with Song Player
 - Recording Your Performance
 - Working with the Memories
- About the Memories and Memory Set structure.
 - Saving Your Settings in the Internal Memory
 - Recalling your Settings from Internal Memory
 - Saving Your Settings in the USB Memory (commercially available)
 - Recalling your settings from an USB Memory
 - Renaming a Memory
 - Exporting a Memory Set in the USB Memory
 - Importing a Memory Set from the USB Memory
 
 - USB MIDI Keyboard Controller
 - Playing with Audio Backing Tracks
 - MENU Options (Advanced Section)
 - Appendix
 - Troubleshooting
 - Specifications
 - Index
 - SETTING Parameters Group
 - T2L EDITOR
 - EFFECTS
 - CONTROL
 - TUNING
 - MEMORY
 - USB REMOVE
 - AUDIO INPUT
 - MIDI
 - GLOBAL
 - SOUND LIBRARY
 - FACTORY RESET
 - VERSION INFO
 
18
Before You Start to Play 
VOLUME
The power will turn on, a progress bar appear in the VIVO S1’s 
display.
After a brief interval, the main page will appear. and VIVO S1 will be 
ready to produce sound.
3.  Use the [VOLUME] knob to adjust the volume.
NOTE
This unit is equipped with a protection circuit. A brief interval 
(a few seconds) after power up is required before the unit will 
operate normally.
Turning the Power O
1.  Rotate the [VOLUME] knob toward the left position to 
minimize the volume.
NOTE
To avoid malfunctions, never disconnect the AC/DC adaptor 
while the instrument is turned on.
2.  Press the VIVO S1’s [ " ] switch.
A power o conrmation message appears:
3.  Press the "YES" Function button to conrm. 
The display shows the following message:
and the unit will turn o after few seconds.
If you do not want power o press the "NO" Function button.
NOTE
If you need to turn o the power completely, rst turn o the 
[
" ]button,thenunplugthepowercordfromthepoweroutlet.
Referto"ConnectingtheACAdaptor"(p.14).
If you do not operate the unit for a certain period 
of time while the power is on, this unit turns o 
automatically.
If you don’t want the power to turn o automatically, 
turn the “AUTO OFF” setting o !
With the factory settings, the unit’s power will automati-
cally be switched o 120 minutes after you stop playing 
or operating the unit. 
Shortly before the VIVO S1 shuts down automatically, the 
display starts counting down the seconds. If you want to 
keep using the VIVO S1 at this stage, press any button. 
If you don’t want the power to turn o automatically, change 
the “AUTO OFF” setting to “OFF” as described on p. 48.
Demo of the VIVO S1
Your VIVO S1 contains a demo that introduces all the best of its tones.
1.  Simultaneously press the [  *-, ] and [SONG] buttons.
Playback starts automatically with the demo song.
2.  Press the [MENU/EXIT] button to leave the demo function.
NOTE
All rights reserved. Unauthorized use of this material for 
purposes other than private, personal enjoyment is a violation 
of applicable laws.










