User's Manual
Table Of Contents
- Important Safety Instruction
- Relevant Indications
- Panel Description
- Connections Quick Guide
- Quick Guide
- Before You Start to Play
- Connecting the AC Adaptor
- Installing and Removing Batteries
- Connecting the Pedals
- Connecting External Audio Amplifier
- Listening Through Headphones
- Connecting Digital Player devices
- Connecting the VIVO S1 to Your Computer
- Connecting an USB Memory (commercially available)
- Connecting an USB MIDI Interface (commercially available)
- Ground Terminal
- Turning the Power On/Off
- Demo of the VIVO S1
- Basic Operation
- Selecting Tones
- Additional Sound
- Sound Effects
- Personalizing Your Sounds
- Other Functions
- Practice with Song Player
- Recording Your Performance
- Working with the Memories
- About the Memories and Memory Set structure.
- Saving Your Settings in the Internal Memory
- Recalling your Settings from Internal Memory
- Saving Your Settings in the USB Memory (commercially available)
- Recalling your settings from an USB Memory
- Renaming a Memory
- Exporting a Memory Set in the USB Memory
- Importing a Memory Set from the USB Memory
- USB MIDI Keyboard Controller
- Playing with Audio Backing Tracks
- MENU Options (Advanced Section)
- Appendix
- Troubleshooting
- Specifications
- Index
- SETTING Parameters Group
- T2L EDITOR
- EFFECTS
- CONTROL
- TUNING
- MEMORY
- USB REMOVE
- AUDIO INPUT
- MIDI
- GLOBAL
- SOUND LIBRARY
- FACTORY RESET
- VERSION INFO
17
Connecting an USB MIDI Interface (commercially available)
NOTE
Carefully insert the USB Memory making sure that the connector
on the device is appropriate and that it is connected in the
proper direction.
Safely Remove the USB Memory
NOTE
You should always safely eject the USB Memory before
physically unplugging it from USB socket. Before to unplug the
USBMemoryusethe"USBREMOVE"function.
1. Press the "MENU" button.
2. Use the [] [] buttons to scroll the list and select the
"USB REMOVE" function.
3. Press the [] buttons to access the function.
The display shows:
4. Press the "YES" Function button to safely remove the USB
Memory.
Now you can unplug the USB Memory safely.
Connecting an USB MIDI Interface
(commercially available)
It may be useful to connect devices such as keyboards that are equipped
with a MIDI connector to transmit or recevive messages. MIDI is a universal
standard, which means that musical data can be sent to and received by
instruments of dierent types and manufacturers.
To do this, you can use of commercially available USB MIDI interface
connected to the USB Memory port of your VIVO S1.
1. Plug a commercially available USB MIDI interface to the
MEMORY port on the VIVO S1’s rear panel.
2. Connect by a MIDI cable the MIDI IN of MIDI interface to
the MIDI OUT connector of the keyboard or other device.
3. Connect by another MIDI cable the MIDI OUT of the MIDI
interface to the MIDI IN connector of the keyboard or
other device.
MIDI
INTERFACE
MIDI cable
MIDI IN
MIDI OUT
Ground Terminal
Depending on the circumstances of a particular setup, you could
feel a tingling sensation at the point where touch this device.
You can eliminate this sensation connecting the ground terminal
with an external ground.
VIVOS1REARSIDE
1. Use the screw-type ground terminal to connect to ground
or to connect to the chassis of the mixer, preamp, or other
device in your system.
Turning the Power On/O
Once everything is properly connected, be sure to follow the
procedure below to turn on their power.
1. Rotate the [VOLUME] knob toward the left position to
minimize the volume.
NOTE
Before turning the VIVO S1 on/o, always be sure to turn the
volume down. Even with the volume turned down, you might
hear some sound when switching the VIVO S1 on/o.
However, this is normal and does not indicate a malfunction.
2. Press the VIVO S1’s [ " ] button located on the right panel
to switch it on.