User's Manual
Table Of Contents
- Important Safety Instruction
- Relevant Indications
- Panel Description
- Connections Quick Guide
- Quick Guide
- Before You Start to Play
- Connecting the AC Adaptor
- Installing and Removing Batteries
- Connecting the Pedals
- Connecting External Audio Amplifier
- Listening Through Headphones
- Connecting Digital Player devices
- Connecting the VIVO S1 to Your Computer
- Connecting an USB Memory (commercially available)
- Connecting an USB MIDI Interface (commercially available)
- Ground Terminal
- Turning the Power On/Off
- Demo of the VIVO S1
- Basic Operation
- Selecting Tones
- Additional Sound
- Sound Effects
- Personalizing Your Sounds
- Other Functions
- Practice with Song Player
- Recording Your Performance
- Working with the Memories
- About the Memories and Memory Set structure.
- Saving Your Settings in the Internal Memory
- Recalling your Settings from Internal Memory
- Saving Your Settings in the USB Memory (commercially available)
- Recalling your settings from an USB Memory
- Renaming a Memory
- Exporting a Memory Set in the USB Memory
- Importing a Memory Set from the USB Memory
- USB MIDI Keyboard Controller
- Playing with Audio Backing Tracks
- MENU Options (Advanced Section)
- Appendix
- Troubleshooting
- Specifications
- Index
- SETTING Parameters Group
- T2L EDITOR
- EFFECTS
- CONTROL
- TUNING
- MEMORY
- USB REMOVE
- AUDIO INPUT
- MIDI
- GLOBAL
- SOUND LIBRARY
- FACTORY RESET
- VERSION INFO
16
Before You Start to Play
Listening Through Headphones
You can use headphones to enjoy the VIVO S1 without disturbing
those around you, such as at night.
1. Here you can connect stereo headphones. VIVO S1 has
two headphones jacks . Two people can use headphones
simultaneously.
DX-HF7 (headphones)
PHONES
AUDIO IN
2. Rotate the VIVO S1’s [VOLUME] knob to adjust the volume
of the headphone.
Cautions when using headphones
• To prevent damage to the cord’s internal conductors, avoid rough
handling. When using headphones, mainly try to handle either the
plug or the headset.
• Your headphones may be damaged if the volume of a device is
already turned up when you plug them in. Minimize the volume
before you plug in the headphones.
• Excessive input will not only damage your hearing, but may also
strain the headphones. Please enjoy music at a reasonable volume.
Connecting Digital Player devices
You can connect the INPUT jack to an audio playback device.
The audio of playback will be reproduced with the VIVO S1's
OUTPUT sockets .
1. Rotate the [VOLUME] the knob toward the left position to
minimize the volume.
2. Connect the VIVO S1’s AUDIO IN jack to the output of an
external signal source.
AUDIO IN
MEMO
You can adjust the volume of device connected to the VIVO S1’s
INPUT jack. See "AUDIO INPUT" (p. 46).
Connecting the VIVO S1 to Your
Computer
• If you use a USB cable (commercially available) to connect the
COMPUTERportlocatedontheVIVOS1’srearpaneltothe
USB port of your computer, you’ll be able to transfer MIDI data
between the VIVO S1 and your sequencer software.
NOTE
VIVO S1 does not support GM/GS standard.
What do you need to connect the VIVO S1 with your
computer?
• USB cable (type A–male - type B–male: commercially available)
1. Use a standard USB cable (AgB-type connectors,
commercially available) to connect the VIVO S1 to your
computer as shown below.
NOTE
• To avoid the risk of malfunction and/or damage to external
speakers, always turn the volume all the way down and switch o
the power on all devices before you make any connections.
• Only MIDI data can be transmitted and received via USB. Audio data
cannot be transmitted or received.
• Switch on the power to the VIVO S1 before you start up the MIDI
application on your computer. Never turn the VIVO S1’s power on/
o while your MIDI application is running.
Connecting an USB Memory
(commercially available)
1. Plug an USB Memory to the MEMORY port on the
VIVO S1’s rear panel.