User manual
Table Of Contents
- Important Safety Instructions
- Relevant Indications
- Panel Description
- Connections Quick Guide
- Quick Guide
- Before You Start to Play
- Connecting the AC Adaptor
- Connecting the Pedals
- Listening Through Headphones
- Connecting External Audio Amplifier
- Connecting Digital Player Devices
- Connecting the CLASSICO L3 to Your Computer
- Connecting the CLASSICO L3 to MIDI devices
- Connecting an USB Memory (commercially available)
- Installing Music Rest
- Installing the USB LED Lamp
- Ground Terminal
- Turning the Power On
- Turning the Power Off
- Demo of the CLASSICO L3
- Organ Sounds
- Using the orchestral sounds
- Playing Piano and Harpsichord Sounds
- Adding Variations to the Sound
- Useful Functions
- Changing the Keyboard’s Split Point
- Transposing the Pitch of the Keyboard
- Tuning and Temperament
- How to Adjust the Volume of each Organ Register
- How to Adjust the Volume of each Section
- Shifting the Tuning of the Orchestral Sections in Octave Steps
- Improve the Sound (Chord Enhancer)
- Changing the Settings for Crescendo
- Restoring the Factory Settings (Factory Reset)
- Working with Memory Pistons
- Practice with Song Player
- Recording Your Performance
- Connecting to MIDI devices
- Playing with Audio Backing Tracks
- Wireless Function
- Advanced Functions
- General procedure
- Import Memory Function
- Export Memory Function
- Expression Pedal Settings
- Damper Pedal Settings
- Speakers Settings
- AUTO OFF Settings
- LOCAL ON/OFF Settings
- Factory Reset
- MIDI PedalBoard
- Importing Organ Sound Set (User 1/2)
- Deleting Organ Sound Set (User 1/2)
- USB Remove
- Keyboard Touch Response
- BLUETOOTH (make it visible)
- CRESCENDO PEDAL
- CRESCENDO SETTING MODE
- IMPORT CRESCENDO SETTING
- EXPORT CRESCENDO SETTING
- Import Memory Function
- General procedure
- Troubleshooting
- Specifications
- Index
- Import Memory Function
- Export Memory Function
- Expression Pedal Settings
- Damper Pedal Settings
- Speakers Settings
- AUTO OFF Settings
- LOCAL ON/OFF Settings
- Factory Reset
- MIDI PedalBoard
- Importing Organ Sound Set (User 1/2)
- Deleting Organ Sound Set (User 1/2)
- USB Remove
- Keyboard Touch Response
- BLUETOOTH (make it visible)
- CRESCENDO PEDAL
- CRESCENDO SETTING MODE
- IMPORT CRESCENDO SETTING
- EXPORT CRESCENDO SETTING
17
Connecting External Audio Amplier
PHONES
AUDIO IN
2. Rotate the CLASSICO L3’s [VOLUME] knob to adjust the
volume of the headphone.
Cautions when using headphones
• To prevent damage to the cord’s internal conductors, avoid rough
handling. When using headphones, mainly try to handle either the
plug or the headset.
• Your headphones may be damaged if the volume of a device is
already turned up when you plug them in. Minimize the volume
before you plug in the headphones.
• Excessive input will not only damage your hearing, but may also
strain the headphones. Please enjoy music at a reasonable volume.
Connecting External Audio Amplier
You can connect the OUTPUT R L/MONO jacks to an external
amplier, mixing consoles, etc.
NOTE
If you want to use only one channel on your external amplier,
connect the L/MONO socket to its input. For optimum sound
quality, we recommend working in stereo, though.
1. Rotate the [VOLUME] knob toward the left position to
minimize the volume.
2. Connect the CLASSICO L3’s OUTPUT jacks to the inputs of
your external audio device.
REAR SIDE
Connecting Digital Player Devices
You can connect the INPUT jack to an audio playback device.
The audio of playback will be reproduced with the CLASSICO L3's
internal speakers .
1. Rotate the [VOLUME] knob toward the left position to
minimize the volume.
2. Connect the CLASSICO L3’s AUDIO IN jack to the output of
an external signal source.
PHONES
AUDIO IN
3. Use the AUDIO IN knob to adjust the input level the
CLASSICO L3’s AUDIO IN jack to the output of the signal
received.
Connecting the CLASSICO L3 to Your
Computer
If you use an USB cable (commercially available) to connect the
COMPUTER port located on the CLASSICO L3’s front panel to the
USB port of your computer, you’ll be able to transfer MIDI data
between the CLASSICO L3 and your sequencer software.
NOTE
The CLASSICO L3 does not support GM/GS standard.
What do you need to connect the CLASSICO L3 with
your computer?
• USB cable (type A–male - type B–male: commercially available)
1. Use a standard USB cable (AgB-type connectors,
commercially available) to connect the CLASSICO L3 to
your computer as shown below.