User manual

15
Quick Guide
/
VALUE/REV TYPE
OBOE TRUMPET
FLUTE VIOLIN
REVERB
PLAYER
The CLASSICO L3 is equipped with 7 types of reverb.
1. Press the [TYPE] button to select the room size type.
The [VALUE/REV TYPE] indicator shows the room type.
2. Rotate the [DEPTH] knob to adjust the amount of reverberation.
Choose the Reverberation (REVERB)
1. Press the [! ] button to start recording.
2. Play your song.
3. Press the [! ] button to stop recording.
4. Press the [*-,] button play song.
5. Press the [*-,] button again to pause the song.
6. Press the [$] button to return to the beginning of the song.
Record and Play Back a Song
1. Rotate the [TONE] button to adjust the brilliance of the sound.
Turn to right to brighten the tone. Turn to left to make it more
mellow.
The [VALUE/REV TYPE] indicator shows the brilliance value..
Adjust the Brilliance of the Sound
PEDAL, MANUAL I, MANUAL II division
These buttons allow you to select an orchestral sound for the
relative division. One of those sounds can be added to the
organ section.
1. Press one of buttons of the orchestral section to recall a sound.
The indicator will light, and the sound will be selected.
Selecting an Orchestral Sound
Use the Memories
Your CLASSICO L3 comes with four memories and three banks (for a total of 12 memories) that can be accessed via the [M1/2/3] and [1]~ [4] memory
piston. Press the [0] pistons to cancel the settings of the currently selected memory and mute all organ and orchestral sounds.
PHONESAUDIO IN
Recall a Memory Save a Memory
1. Press the [M1/2/3] piston to select the memory bank.
The round button lights.
2. Press one of the [1]~ [4] pistons to recall the memory.
1. Press the [M1/2/3] piston to select the memory bank you want to save.
The round button lights.
2. Press and hold the [1]~ [4] piston button to save the memory.
1. Simultaneously press the [*-,]
button and [SONG] buttons.
Demo Song
Selecting an Organ Sound
PEDAL, MANUAL I, MANUAL II division
These tilt tabs allow you to select an organ sound for the
relative division. You can select several organ sounds (tilt
tabs) simultaneously.
1. Press the lower part of one of the “PEDAL,” “MANUAL I,” or “MANUAL II”
tilt tabs.
The indicator will light, and the sound will be selected.
2. Press the upper part of the tilt tab to cancel the sound.
The titl tab indicator will turn o and the selected sound will be cancelled.
1. Press and hold one of the button of the section you want to
adjust.
2. Turn the [TONE/LEVEL] knob to adjust the volume.
3. Press the button of the section again to leave edit mode.
Adjust the Volume of Each Section