START HERE Set up Instructions For Use
Dexcom G6 CGM (G6) Overview Display Device Your smart device • Shows glucose information Dexcom receiver • Set up your smart device, Dexcom receiver, or both • For a list of current compatible smart devices and operating systems go to: dexcom.
What It Does The G6 sends G6 sensor glucose readings (G6 readings) to your display device. Choose App, Receiver, or Both The receiver is a dedicated medical device. Your smart device is not, even though you can run the G6 app on it. Your smart device is not a dedicated medical device because the app could miss an alarm/alert just because it is on a smart device—for example, due to smart device settings, smart device or app shutting off, low battery, etc.
Your smart device Applicator with Built-in Sensor Set Up App Transmitter
Step 1: Set Up App A Download and open the Dexcom G6 app B Follow onscreen setup instructions 1 When prompted: • Send your data to the cloud. This lets you use: Consent to Share Data with Dexcom • Share: Send your G6 data to followers. • CLARITY: Reflect on data with doctors; see patterns (may not available in all regions). • Enter your Sensor code (from the sensor applicator you will insert). • No sensor code? See Using Your G6, Appendix A Troubleshooting.
• Enter your Serial Number (SN) from: Transmitter box Back of transmitter or After you enter your SN, your G6 searches for the transmitter. While it is searching, you will not get G6 readings or alarm/alerts. 2 See the blue sensor warmup timer? That means your sensor is getting used to your body.
Step 2: See Using Your G6 Learn how to: • Read your home screen • Use alarm and alerts • Make treatment decisions • Troubleshoot issues Step 3: Optional – Set up Receiver Turn on the receiver by pressing the power button down for 2-3 seconds. Then follow onscreen instructions. Welcome Do not use the Set Up Receiver tab. Those steps are for setting up the receiver before setting up the app.
Receiver Applicator with Built-in Sensor Set Up Receiver Transmitter
Step 1: Set Up Receiver A Take receiver out of box B Turn on receiver Press power button for 2-3 seconds.
• Serial Number (SN) from: Transmitter box Back of transmitter or After you enter your SN, your G6 searches for the transmitter. While it is searching, you will not get G6 readings or alarm/alerts. 2 You are done with this step when you see this screen: Insert & Attach 1. Insert sensor. 2. Attach transmitter. See product instructions for details.
Step 2: Use Applicator to Insert Built-in Sensor A Take applicator with built-in sensor out of sensor box Gather materials: applicator (with code you just entered), transmitter, and wipes. B Pick sensor site 2 years and older OR 2-17 years only Avoid bones, irritated skin, tattoos, and areas that get bumped. C Use applicator to insert built-in sensor 1 Get sensor applicator and an alcohol wipe. 2 Wash and dry hands.
3 Clean sensor site with alcohol wipe. 4 Peel off adhesive backings. Do not touch adhesive. XXXX 5 Place applicator on skin. 6 Fold and break off safety guard. 7 Press button to insert sensor. 8 Remove applicator from skin leaving patch and holder on. 9 Discard applicator. Follow local guidelines for blood-contacting components.
Step 3: Attach Transmitter A Take transmitter out of box B Snap in transmitter 1 Clean transmitter with alcohol wipe. 2 Insert transmitter, tab first, into holder. Tab Slot 3 Snap in transmitter. It clicks into place. Make sure it is flat and snug in holder. 4 Rub around patch 3 times.
Step 4: Start Sensor on Receiver A Wait up to 30 minutes for pairing During pairing: • No G6 readings or alarm/alerts • Always keep receiver within 6 meters of transmitter B Tap Start Sensor to begin 2-hour warmup During warmup you will not get G6 readings or alarm/alerts Start Sensor C Wait • When complete, tap Next to go to home screen • Now you get G6 readings and alarm/alerts
Step 5: See Using Your G6 Learn how to: • Read your home screen • Use alarm and alerts • Make treatment decisions • Troubleshoot issues Step 6: Optional - Set up App Download the app onto your smart device and open it. Then follow onscreen instructions. Do not use the Set Up App tab. Those steps are for setting up the app before setting up the receiver.
© 2019 Dexcom, Inc. All rights reserved. Covered by patents dexcom.com/patents. Dexcom, Dexcom Share, Dexcom Care, Dexcom Clarity, and Share are registered trademarks of Dexcom, Inc. in the United States and may be in other countries.
Dexcom, Inc. 6340 Sequence Drive San Diego, CA 92121 USA +1.858.200.0200 dexcom.
