User`s guide

Dexcom G4 PLATINUM User’s Guide | 49
1. From the Settings menu, press the UP
or DOWN button to scroll to “Transmitter
ID” and press the SELECT button.
2.Startwiththerstnumberorletter(donotenter“SN”):
a. Press the UP or DOWN button to
show the correct number or letter.
b. Press the RIGHT or SELECT
button to move to the next value
and repeat step a.
c. Continue repeating steps a and b to
enter the whole transmitter ID.
d. Press the SELECT button after you
enter the last number or letter. You
will return to the Settings menu.
NOTE: The “Transmitter ID” menu option is marked with an antenna
symbolasagraphicalag;itdoesnottellyouwhetherthetransmitter
and receiver are communicating. The “Transmitter ID” menu option
only shows when you are not in a sensor session. See Section 5.4 for
the antenna symbol that shows whether the transmitter and receiver
are communicating.
5.2.4 TURNING ON SHARE ON YOUR
RECEIVER
Please see the Pairing Receiver section in Chapter Two of your Dexcom
Share User Manual to learn how to turn on the Share feature on your
Dexcom G4 PLATINUM Receiver with Share.
Transmitter ID setting screen,
rstdigithighlighted
Settings menu,
Transmitter ID highlighted