User`s guide

46 | Dexcom G4 PLATINUM Continuous Glucose Monitoring System
5
(3) Press the SELECT button after you enter the last number or
lettertoconrmthetransmitterID.
Your transmitter ID is a unique code with 5 numbers and/or letters found
in the following locations:
• On the transmitter box label
• On the bottom of the transmitter
c. Set your low and high glucose alert values. Your low and high
glucose alerts are pre-set to 80 mg/dL and 200 mg/dL but can
be changed.
(1) Press the UP or DOWN button to select your alert level. The low
alert can be changed in steps of 5 mg/dL and the high alert can
be changed in steps of 10 mg/dL.
(2) Press the SELECTbuttontoconrmyouralertlevel.
• You can also change your alert levels in the Alerts menu.
• The unit of measure (mg/dL) is not adjustable.
If you need to change the time, date or transmitter ID after
you complete the Setup Wizard see Section 5.2, The
Settings Menu.
The Setup Wizard is now complete. To start using your Dexcom G4
PLATINUM CGM System you must insert a sensor (see Chapter 6,
Inserting a Sensor and Starting a Sensor Session).
High Alert setting screenLow Alert setting screen