User`s guide

Dexcom G4 PLATINUM User’s Guide | 141
• Make sure your transmitter is snapped in.
• Make sure your sensor pod is not dislodged or peeling up.
Make sure nothing is rubbing the sensor pod (i.e. clothing, seat
belts, etc.).
Make sure you have selected a good insertion site (see Chapter 6,
Section 6.3, Choosing an Insertion Site).
Make sure your insertion site is clean and dry prior to
sensor insertion.
13.6.2 MANUAL SENSOR SHUT-OFF – “STOP
SENSOR”
There may be times that you will want to stop your sensor session
before the end of the seven days. Some of these times may include
removing the sensor early due to:
• Calibration issues that cannot be resolved
symbol that does not resolve
• Sensor adhesion issues
• Lifestyle needs
When you are in an active sensor session, you
will see the “Stop Sensor” option but not the
“Start Sensor” option on the Main Menu.
When you are not in an active sensor session,
you will see the “Start Sensor” option but not
the “Stop Sensor” option on the Main Menu.
Stop your sensor session if you remove your
sensor before the end of the full 7-day period.
1. To end your sensor session, select “Stop Sensor” from the
Main Menu.
Main Menu,
Stop Sensor highlighted