User`s guide
124 | Dexcom G4 PLATINUM Continuous Glucose Monitoring System
11
Youcansetthesealertswiththeprolessetting(seeChapter9,Section
9.3.2,AlertProleDetails,“AllOtherAlerts”).Afterthe6-hour,2-hour,
and 30-minute reminders, you continue to receive sensor glucose
readings. Press SELECT to clear these screens. You must remove your
sensor after the Replace Sensor Now screen (00:00:00) shows.
Sensor glucose readings do not show on
the receiver after your sensor session
ends. The trend graphs show that the sensor
session has ended with a red stoplight symbol
at the top.
You must remove your sensor and insert a
new sensor.
11.2 REMOVING A SENSOR
30-minute Replace Sensor
Replace Sensor
end of session
Trend graph with
red stoplight in upper right
6-hour Replace Sensor 2-hour Replace Sensor