User`s guide
102 | Dexcom G4 PLATINUM Continuous Glucose Monitoring System
If you set your fall rate to 2 mg/dL per minute
and your sensor glucose readings fall at this rate
or faster, the “FALLING single arrow” screen
shows, and the receiver vibrates or beeps in line
withyourprolesettings.
If you set your rise rate to 3 mg/dL per minute
and your sensor glucose readings rise at this
rate or faster, the “RISING double arrow” screen
shows, and the receiver vibrates or beeps in line
withyourprolesettings.
These steps show how to change your rise or fall rate alert settings.
1. Press the UP or DOWN button to choose
“Rise Rate” or “Fall Rate,” and press the
SELECT button.
2. Highlight “On/Off” and then press the
SELECT button.
9
Fall Rate menu,
On/Off highlighted
Fall alert
Rapid Rise alert
Advanced menu,
Fall Rate highlighted