User`s guide

Dexcom G4 PLATINUM (Pediatric) System User’s Guide | 103
button to clear it, if your sensor glucose readings are still at or below
55 mg/dL.
• Your receiver does not alert if you have a sensor glucose reading
outside your target range and you calibrated in the last 5 minutes.
• The receiver alerts if your sensor glucose reading stays outside your
targetrangeafterveminutes.
9.1.3 GETTING TO THE ALERTS MENU
1. Press the SELECT button to turn on the receiver. The 3-hour trend
graph shows.
2. Press the SELECT button to see the Main Menu.
3. From the Main Menu, press the UP or DOWN button to scroll to
“Alerts,” and press the SELECT button. The Alerts menu shows.
9.1.4 HIGH AND LOW GLUCOSE ALERTS
The steps for setting both the high alert and the
low alert are the same.
The following steps show you how to change
your high and low alert settings.
1. From the Alerts menu, press the UP or
DOWN button to select “High Alert” or “Low
Alert” and press the SELECT button.
Main Menu,
Alerts highlighted
Trend graph
Alerts menu,
High Alert highlighted
Alerts menu,
Low Alert highlighted