User`s guide

Dexcom G4 User’s Guide | 127
For transmitters rated at a maximum output power not listed above, the
recommended separation distance in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum
output power rating of the transmitter in watts (W) according to the transmitter
manufacture.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reection from structures, objects and people.
Rated
maximum
Output Power of
Transmitter (W)
Separation Distance
According to Frequency of Transmitter (m)
150 kHz to 80 MHz
d = 1.2 P
1/2
80 MHz to 800 MHz
d = 1.2 P
1/2
800 MHz to 2.5 GHz
d = 2.3 P
1/2
0.01
0.1
1
10
100
0.12
0.38
1.2
3.8
12
0.12
0.38
1.2
3.8
12
0.23
0.73
2.3
7.3
23
Recommended Separation Distances Between Portable and Mobile RF
Communications Equipment and Receiver
The receiver is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the
receiver can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment
(transmitters) and the receiver as recommended below, according to the
maximum output power of the communications equipment.