User`s guide

Dexcom G4 PLATINUM User’s Guide | 93
9.1.2.3 LOW GLUCOSE ALARM
TheDexcomG4PLATINUMSystemalsohasaxedlowalarmat55
mg/dL. This is different than your low glucose alert. You cannot change
or turn off this alarm or its re-alarm settings.
•Thereceiverdisplaysthelowglucosealarm
screen.
•Re-alarm:Thereceiverautomaticallyalerts
again 30 minutes after you press the SELECT
button to clear it, if your sensor glucose
readings are still at or below 55 mg/dL.
•Yourreceiverdoesnotalertifyouhavea
sensor glucose reading outside your target
range and you calibrated in the last 5 minutes.
•Thereceiveralertsifyoursensorglucosereadingstaysoutsideyour
targetrangeafterveminutes.
9.1.3 GETTING TO THE ALERTS MENU
1. Press the SELECT button to turn on the receiver. The 3-hour trend
graph shows.
2. Press the SELECT button to see the Main Menu.
3. From the Main Menu, press the UP or DOWN button to scroll to
“Alerts,” and press the SELECT button. The Alerts menu shows.
Main Menu,
Alerts highlighted
Trend graph
Alerts menu,
High Alert highlighted
Low glucose alarm