User`s guide

Dexcom G4 PLATINUM User’s Guide | 45
2.Startwiththerstnumberorletter(donot
enter “SN”):
a. Press the UP or DOWN button to show
the correct number or letter.
b. Press the RIGHT button to move to the
next value and repeat step a.
c. Continue repeating steps a and b to
enter the whole transmitter ID.
d. Press the SELECT button after you enter
the last number or letter. You will return
to the Settings menu.
NOTE: The Transmitter ID menu option is marked with an antenna
symbolasagraphicalag;itdoesnottellyouwhetherthetransmitter
and receiver are communicating. The Transmitter ID menu option only
shows when you are not in a sensor session. See Section 7.4 for the
antenna symbol that shows whether the transmitter and receiver are
communicating.
5.3 CHECKING INFORMATION ABOUT YOUR
DEXCOM G4 PLATINUM SYSTEM
You can check your receiver for information about your CGM system at
any time.
1. From the Settings menu, press the UP or
DOWN button to scroll to “Device Info.”
2. Press the SELECT button. Information
about your sensor session and system will
show.
Transmitter ID
setting screen,
rstdigithighlighted
Settings menu,
Device Info
highlighted