User`s guide

44 | Dexcom G4 PLATINUM Continuous Glucose Monitoring System

4. Press the RIGHT button to move to the

next value.

The date format is YYYY/MM/DD.

5. Press the SELECT button after choosing

AM or PM. You will return to the Settings

menu.

You might need to reset the receiver’s time and date if the

rechargeable battery drains. If this happens, the receiver will alert you

and automatically take you to the time/date setting screen.

5.2.3 ENTERING YOUR TRANSMITTER ID

Any time you switch to a new transmitter and/or receiver you must

enter the transmitter ID into your receiver. The transmitter ID is a series

of 5 numbers and/or letters that can be found in the following locations:

 •Onthetransmitterboxlabel

 •Onthebottomofthetransmitter

IfyoucannotndyourtransmitterID,pleasecontactDexcomTechnical

Support (see Chapter 15, User Assistance).

You can only set your transmitter ID when you are not in a sensor

session. During a sensor session, “Transmitter ID” will not be an option

on the Settings menu.

To enter the transmitter ID follow these steps:

1. From the Settings menu, press the UP or

DOWN button to scroll to “Transmitter ID”

and press the SELECT button.

Time/Date setting screen,

year highlighted

Settings menu,

Transmitter ID highlighted