User`s guide

42 | Dexcom G4 PLATINUM Continuous Glucose Monitoring System
5
Your transmitter ID is a unique code with 5 numbers and/or letters found
in the following locations:
 •Onthetransmitterboxlabel
 •Onthebottomofthetransmitter
c. Set your low and high glucose alert values. Your low and high
glucose alerts are pre-set to 80 mg/dL and 200 mg/dL but can be
changed.
(1) Press the UP or DOWN button to select your alert level. The low
alert can be changed in steps of 5 mg/dL and the high alert can
be changed in steps of 10 mg/dL.
(2) Press the SELECTbuttontoconrmyouralertlevel.
  •Youcanalsochangeyouralertlevelsinthealertsmenu.
  •Theunitofmeasure(mg/dL)isnotadjustable.
  •Ifyouneedtochangethetime,dateortransmitterIDafter
you complete the Setup Wizard see Section 5.2, The Settings
menu.
The Setup Wizard is now complete. To start using your Dexcom G4
PLATINUM CGM System you must insert a sensor (see Chapter 6,
Inserting a Sensor and Starting a Sensor Session).
Setting High Alert
screen
Setting Low Alert
screen