User`s guide

Dexcom G4 PLATINUM User’s Guide | 41
CHAPTER 5: DEXCOM G4 PLATINUM SYSTEM
SETUP
ThischapterhelpsyouwhenyourstsetupyourContinuousGlucose
Monitoring System. Read this chapter before you start.
5.1 SETTING UP THE RECEIVER AND PAIRING
WITH YOUR TRANSMITTER
TheSetupWizardguidesyouthroughsetupthersttimeyouturnon
your receiver.
1. Remove the transmitter from its packaging. Wait 10 minutes for the
transmitter to turn on before setting up the receiver.
2. Make sure your receiver is fully charged (see Chapter 4, Section 4.1,
Charging Your Receiver Battery).
3. Press the SELECT button on the receiver to turn it on. The Setup
Wizard will guide you to enter the following setup information:
a. Set the time and date. The date format is YYYY/MM/DD.
(1) Press the UP or DOWN button to enter
the current date and time.
(2) Press the RIGHT or SELECT button to
move to the next section.
(3) Press the SELECTbuttontoconrm
time and date.
b. Enter your transmitter ID.
(1) Press the UP or DOWN button to enter
your transmitter ID.
(2) Press the RIGHT or SELECT button to
move to the next space.
(3) Press the SELECTbuttontoconrm
the transmitter ID.
Setting Time/Date
screen
Setting Transmitter ID
screen