User`s guide

56 | Dexcom G4 PLATINUM Professional Continuous Glucose Monitoring System
5
a. Press the UP or DOWN button to
show the correct number or letter.
b. Press the RIGHT or SELECT button
to move to the next value and repeat
step a.
c. Continue repeating steps a and b to
enter the whole transmitter ID.
d. Press the SELECT button after you
enter the last number or letter. You will return to the Settings menu.
NOTE: The “Transmitter ID” menu option is marked with an antenna
symbolasagraphicalag;itdoesnottellyouwhetherthetransmitter
and receiver are communicating. The “Transmitter ID” menu option only
shows when you are not in a sensor session. See Section 5.4 for the
antenna symbol that shows whether the transmitter and receiver are
communicating.
5.3 CHECKING INFORMATION ABOUT THE
DEXCOM G4 PLATINUM PROFESSIONAL
SYSTEM
You can check the receiver for information about the CGM system at
any time.
1. From the Settings menu, press the UP or
DOWN button to scroll to “Device Info.”
2. Press the SELECT button. Information
about the sensor session and system will
show.
3. Scroll down to see all of the Device Info:
 •InsertionTime
 •LastCalibration
 •TransmitterBattery
Transmitter ID setting screen,
rstdigithighlighted
Settings menu,
Device Info highlighted